What are the Solutions to Husqvarna 125b Blower Problems?

Husqvarna, a well-known brand in the industry, has developed the 125B portable gas blower, which combines power, quality, and ease of use into one unit. This gadget is ideal for both professionals and beginners who require power for their jobs. However, depending on the state and intended use of your Husqvarna 125b blower, you may encounter a few common troubles. 

Poor maintenance is to blame for some of the issues, such as engine troubles.

Users who are aware of their problems in advance are better prepared to handle them. Let’s get down to business.

Problems with Husqvarna 125b Blower and Their Solutions:

As a result of the malfunctioning, customers may get disappointed. The engine will start on occasion, but only at a very slow speed, which is bothersome.

Let’s look at a few of the issues and their workable solutions:

1. Engine won’t turn on

One of the major problems with this model is that the engine does not turn. This problem can arise for a variety of reasons, including overflowing of the engine and an empty fuel tank.

The engine of your blower might sometimes be seen in such states as fuel isn’t reaching the spark plug or the spark plug isn’t sparking. These are some other issues why the engine gets issues with turning on. It can also happen when the engine is in low compression.

The Fix:

 Figure out what’s causing the problem first. In the STARTING AND STOPPING section, look up “Starting a Warm Engine Fill the tank with the proper fuel mixture. When you detect that your spark plug isn’t firing, replace it.

If fuel does not reach the carburetor in a timely manner, check for a dirty fuel filter and, if necessary, replace it. Furthermore, you should check for kinked or split gasoline lines in this situation, and after working on that part, you should fix or replace it.

2. Engine won’t run smoothly

One of the most typical Husqvarna 125b Blower complaints is that the engine does not run smoothly. This is because when fuel is unable to reach the carburetor. Thus, the carburetor has to be adjusted. This can also happen if the seals on the crankshaft are worn out. 

Moreover, low compression is a common problem with a blower’s engine, so when the engine will not run smoothly, this is needed to remember that if the engine does not run smoothly, there must be something odd with compression.  

The Fix:

Examine the fuel filter for dirt and replace it if necessary. Make sure the fuel line isn’t kinked or split; when fuel cannot reach the carburetor, fix or replace it.

The carburetor has to be adjusted. In this case, see “Fine Adjustment of the Idle Speed- -T” in the MAINTENANCE section to fix the carburetor and get your blower’s engine running properly.

3. Under Load, Engine will not accelerate, lacking power, Engine might die

Another common issue with the engine of your blower is when the engine will be under load, so the engine will not accelerate, lack power, and because of these issues, the engine might die. 

The source of the problem is clear; the air filter is clogged or the spark plug is jammed. Carbon buildup is another reason for your blower’s strange behavior. 

The Fix:

Firstly, the air filter must be cleaned or replaced, if the air filter is clogged. If you find a fouled spark plug in the engine, you should replace it. Clean or replace the spark plug, then re-gap it. 

When you face such a problem with carbon buildup, you will be referred to an authorized service dealer.

4. Excessive Engine Smoke

You can notice problems like excessive engine smoke. The reason behind this issue can be when the choke partially is activated or improper fuel mixture in the engine of your blower.

The Fix:

In such a situation, when the choke is half on, adjust it. To avoid an issue when the engine smokes excessively, empty the gasoline tank and replace it with the correct fuel mixture.

5. Engine goes Overheating

Engine going hot or overheated can be another problem with your blower’s engine that stops the blower from working. Reasons behind this problem can occur when the fuel mixture is off or the spark plug is faulty. Moreover, if the carburetor becomes damaged or carbon deposits form, the engine may become overheated.

The Fix:

To get rid of the hot engine, you first need to work on the fuel mixture part which can be incorrect. When the fuel mixture is not proper, look for “Fuel mixture, “In the FUEL HANDLING section and fix the issue. If you detect that the spark plug is incorrect, replace it with the proper one. When you have carburetor or carbon build-up problems on your blower’s engine, contact an authorized service dealer.

What Majority of the Users Feel About Husqvarna 125b Blower?

The Husqvarna 125B leaf blower is clearly a powerful instrument that will complete your jobs quickly. The product’s design was important to the producer, and it contained various characteristics that increased its flexibility and comfortability. 

It does, however, have a few drawbacks that are typical of engine issues. These can be dealt with in a long-term manner. It’s one of the most often used leaf blowers. 

Although this blower does not have the same well-known brand name as some other well-known gas-powered leaf blower companies, you should not ignore it when shopping for a new leaf blower. Make this powerful device a part of your next purchase. 

Final Thoughts

The Husqvarna 125B is a well-known leaf blower for use in service all around the world. Issues with it, can sometimes be unpredictable. 

However, some problems become so widespread among users that they can be prevented by reading the guide and taking care.

Customers who are interested in learning more about this interesting blower should read this article. It is easier to deal with the circumstance when users will know about the alternatives.

Related Posts: